How to use a dual projection system

Overview

Various classrooms on campus have dual projection systems available. Dual projection means the classroom has two projectors and projectable surfaces. These may be a manual pull-down screen, a powered screen, or a writeable projection surface.  The projection can typically come from several sources in the room, including a laptop you bring with you. What is projected is controlled by a touch panel in the classroom, and each projector and screen can show the same image or can show different images. For a list of all classrooms with dual projection available, check our Classroom Technology list. 

Instructions

  1. Touch the Crestron touch panel
  2. Select ON:
    Crestron ON OFF
     
  3. Select a source:
    Crestron Source Select
     
  4. Select the source for each screen and the audio:
    Crestron Screen Select
     

  5. If using a laptop make sure the laptop's audio output is set to Crestron:
    Crestron Laptop Volume
     

  6. When done with the system, or to change sources, press return:
    Crestron Screen Select
     

  7. Then choose your new source or power the system off by tapping OFF
  8. Confirm by tapping OFF again:
    Crestron Power OFF

  9. You will then see the cool down screen and the projector screen will retract
    Crestron Cool Down


The system is now powered off and ready for the next class

Print Article